AgKNX HP21 Hydraulic Digger with Multi-Function Skid Steer Mounting Plate
This industrial duty skid-steer post hole digger fits any standard (45 in.) skid-steer plate and requires between 12 GPM and 21 GPM hydraulic oil flow from the skid steer’s pumping system.
- Five different mounting locations, (center, full R/L, half R/L)
- Runs off of 12-21 GPM flow rate
- Mounts to standard 45 in. Skid Steer Plate
- Swivel mounted to drill straight up and down, even on side-slopes
- Heavy Duty 8mm welded steel construction (plate)
- Cradle for stabilizing hydraulic powerhead during transiting between jobsites
- High-Friction / slip resistant compound on top of frame (for stepping on when exiting/entering) the skid-steer
- Compatible with all augers used with 2 in. hex drive systems, including our own Earth Ogre lineup
- Includes Quick-Connect Fittings, hoses, everything needed to connect to the skid-steer
| Specification | Description |
|---|---|
| Brand | AgKNX |
| Country of Origin | Imported |
| Auger Diameter | 6-24 in. |
| Auger Length | 48 in. |
| Auger Material | Steel |
| Auger Speed | 36-139 rpm |
| Boom Diameter | 0 in. |
| Boom Pole Shape | N/A |
| Compatibility | Skid Steer Attachment |
| Features | Fully Cast casing, class leading torques |
| Gearbox Ratio | 3.67 |
| Hitch Type | Other |
| Lift Capacity | 0 lb. |
| Maximum Tractor Horsepower | 21 hp |
| Minimum Tractor Horsepower | 18 hp |
| Number Of Lifting Loops | 0 |
| Primary Material | Steel |
| Product Height | 15 in. |
| Product Length | 48 in. |
| Product Weight | 365 lb. |
| Product Width | 38 in. |
| Recommended Auger Part Number | 24-0396 |
Reviews
There are no reviews yet.