Hobart Handler 125 Wire Feed Welder, runs on 120V input power, 19.4 x 10 x 13.5in., 57.5 lb., 24 Gauge- 3/16 in

The Hobart Handler 125 Wire Feed Welder is a reliable, portable wire feed welder that’s perfect for a variety of projects. Running on 120V input power, the Hobart welder welds up to 3/16 in. mild steel, and is MIG capable with a built-in gas valve. The four voltage ranges of this Handler welder allows you to adjust the arc for different thicknesses. The wire feed welder also has a built-in contactor that keeps wire electrically “cold” until the trigger is pulled which gives you ease of use.

• Broad output range of 25 to 130 amps allows you to weld up to 3/16 in. steel with flux-cored wire
• Four voltage ranges on the Hobart welder allow you to adjust the arc for different thicknesses
• Factory-installed gas solenoid allows you to easily change from flux-cored wire to MIG welding
• Built-in contactor on the Handler welder keeps wire electrically “cold” until trigger is pulled which gives you ease of use
• Durable feed head with quick-release drive roll tension lever offers a positive feed with adjustable tension and gives you easy access to thread new wire
• Spool hub assembly accommodates 4 or 8 inch spools and offers you flexibility to use small or large spools of wire to better suit your welding needs
• Self-resetting thermal overload protects power transformer from thermal overload to provide you maximum reliability
• Material Thickness: 24 ga.- 3/16 in.
• Welder dimensions: 19.4 in. L x 10 in. W x 13.5 in. H
• Weight: 57.5 lb.
• Amperage: 25A-130A
• Input Voltage: 110/115/120V
• Wire Feed Speed: 88 IPM-545 IPM
• Includes: a comfortable 8 ft. (2.4 m) H100F2-8 gun with liner for .030-.035 in. diameter wire, work cable with clamp, (2) – 0.030 (0.8 mm) contact tips, power cord with molded plug, weld set -up chart, and owner’s manual with installation, operation and maintenance guidelines
• 3 year warranty on the wire feed welder offers assurance