Hobart Handler 190 MIG Welder IPM Wire Speed Feed

Hobart 230V 25A- 190A Handler 190 MIG Welder, 68 lb., 24 Gauge- 5/16 in. Thickness, 40 IPM- 170 IPM Wire Speed Feed

The Hobart Handler 190 MIG Welder is an industrial performance welder that is spool gun ready for aluminum. Running on 230V input power, this Hobart MIG welder welds up to 5/16 in. mild steel and is flux-cored or MIG ready. The seven voltage sections, enhanced magnetics, and infinite wire feed speed control of this Handler MIG welder allow you to fine control the output parameters for improved arc performance with less spatter.

• 7 voltage selections, enhanced magnetics, and infinite wire feed speed control offer easier fine control of the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up
• The MIG welder accepts uncomplicated, easy-to-install direct plug-in SpoolRunner 100 spool guns that will enhance feed-ability and reduce “bird-nesting” associated with soft aluminum wires
• Quickly reference initial settings for different wires, gases, materials, and thicknesses as they provide quick starting points for novices and professionals alike
• Built-in contactor keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe
• Industrial cast aluminum wire drive system features a durable wire feed that provides you professional performance
• Convenient polarity changeover with tip holder makes it easier and quicker for you to change polarity between solid or tubular wire
• Less of your time consumed in setup by offering three Quick Select drive roll grooves, two for different size solid wire and a third for flux-cored wire
• Short circuit protection guards the Hobart welder against current overload
• Includes convenient storage holes for spare tips
• Integrated spool gun control circuitry is standard and eliminates your need for an additional control box or adaptor to connect the SpoolRunner 100 spool gun
• Shielding gas and safety equipment are not included with the Handler MIG welder
• Self-resetting motor protection protects wire feed system from overload, you won’t need to change or reset the circuit breaker button
• Self-resetting thermal overload protects the power transformer from thermal overload to provide you maximum reliability
• Material Thickness: 24 ga.- 5/16 in.
• Dimensions: 19.5 in. L x 10.635 in. W x 12.375 in. H
• Weight: 68 lb.
• Amperage Range: 25A-190A
• Input Voltage: 220/230/240V
• Wire Feed Speed: 40 IPM- 170 IPM
• Includes: Comfortable 10 ft. (3 m) HR-100 gun, welding guide and material thickness gauge, 10 ft. (3 m) work cable with clamp, Built-in gas solenoid valve and dual-gauge regulator with gas hose, spool hub assembly accommodates 4 or 8 in. spools, sample spool of .030 in (0.8mm) self-shielding flux-cored wire, .030 in. (0.8mm) contact tips, Quick Select drive roll for .024 in (0.6mm) or .030/.035 in. (0.8/0/9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire, power cord with plug, owner’s manual with installation, operation and maintenance guidelines
• Hobart 5/3/1 industrial warranty on the 190A MIG welder offers assurance

hobart 190 mig welder, hobart handler 190 mig wire welder, handler 190, hobart 190 review