Hobart 115V/230V/210A Handler 210MVP MIG Welder, 1/4 in. to 3/8 in. Thickness, 40 IPM- 770 IPM Wire Speed Feed

The Hobart Handler 210MVP MIG Welder is an industrial performance welder that is spool gun ready for aluminum. Running on either 115V or 230V input power, this Hobart MIG welder welds up to 3/8 in. mild steel and is flux-cored or MIG ready. The seven voltage sections, enhanced magnetics, and infinite wire feed speed control of this Handler MIG welder allow you to fine control the output parameters for improved arc performance with less spatter. The 210MVP MIG welder also accepts an uncomplicated, easy-to-install direct plug-in SpoolRunner 100 spool gun that allows you to weld aluminum with enhanced feed ability and reduction of “bird-nesting”.

• Max 210 amps in small portable case are sized for you to transport the unit to the jobsite with the power to weld 3/8 in. mild steel
• 7 (230 V) and 4 (115V) voltage settings with infinite wire feed speed control offer easier fine control of the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up
• Accepts uncomplicated, simple-to-install direct plug-in SpoolRunner 100 spool gun to enhance feed-ability and reduce “bird-nesting” associated with soft aluminum wires
• Integrated spool gun control circuitry is standard and eliminates your need for an additional control box or adapter is required to connect the SpoolRunner 100 spool gun.
• Dual-voltage capability with MVP (multi-voltage plug) allows you to connect to common 115 or 230 V power receptacles without the use of any tools; just choose the plug that fits the receptacle
• Door Chart with initial settings allows you to quickly reference initial settings for different wires, gases, materials, and thicknesses and provides quick starting point for novices and professionals alike
• Built-in contactor keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe
• Industrial cast aluminum wire drive system features a durable wire feed that provides you professional performance
• Convenient polarity changeover with tip holder makes it easier and quicker for you to change polarity between solid or tubular wire
• Less of your time consumed in setup by offering three Quick Select drive roll grooves, two for different size solid wire and a third for flux-cored wire
• Short circuit protection guards the Hobart welder against current overload
• Self-resetting motor protection protects wire feed system from overload, you won’t need to change or reset the circuit breaker button
• Self-resetting thermal overload protects the power transformer from thermal overload to provide you maximum reliability
• Shielding gas and safety equipment are not included with the Handler MIG welder
• Material Thickness: 1/4 in. to 3/8 in.
• Dimensions: 19.5 in. L x 10.635 in. W x 12.375 in. H
• Weight: 79 lb.
• Input Voltage: 110/115/120V, 220/230/240V
• Wire Feed Speed: 40 IPM-770 IPM
• Includes: Comfortable 10 ft. (3m) HR-100 gun, Owner’s manual with installation, operation and maintenance guidelines, 10 ft.(3m) work cable with clamp, Built-in gas solenoid value and dual-gauge regulator with gas hose, Spool hub assembly accommodates 4 or 8 in. spools, Sample spool of .030 in. self-shielding flux-cored wire, 030 (0.8mm) contact tips, Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in., Power cord with 5-15 P (115 V, 15 A) and 6-50 P (230 V, 50 A) MVP plugs, Welding guide and material thickness gauge
• Hobart 5/3/1 industrial warranty on the 210MVP MIG welder offers assurance