LimbSaw LS 8 Hydraulic 20 in Skid Steer Tractor Tree Chainsaw
The LS8 LimbSaw is a front-end loader attachment with an 8′ mast that allows you to trim trees from the safety and comfort of your tractor seat. Running off your tractor’s auxiliary hydraulics, it can reach up to 21′ when mounted on a standard tractor loader. Operates at 5,000 RPM with a 20″ bar and 0.325 pitch chain and only requires 7 GPM hydraulic flow.
- Self-oiling system provides continuous lubrication directly from your tractor’s hydraulic system
- Reversible motor allows an operator to back the chain out of a pinch
- Easily installed, attached and removed at only 90 lbs.
- Uses 7 GPM flow
- Uses 3/8in. or 1/2in. hoses (hoses provided to end of boom)
Product Summary
This innovative tree trimming attachment uses the height and hydraulic power of a tractor with front-end loader to create a trimmer that is quiet, safe and environmentally friendly without sacrificing power and usability. It mounts to the front-end loader’s bucket and connects to an auxiliary hydraulic hookup for power. The 20in. bar, 0.325in. pitch saw sits on an 8ft. steel mast that gives you an 18 to 21-ft. reach, when used with a fully extended loader bucket and operates at 5,000 RPM.
| Item# | 395208 |
| Brand | Limbinator |
| Manufacturer’s Warranty | 1 year Limited Warranty |
| Ship Weight | 90.0 lbs |
| Bar Length | 20 in |
| Horsepower | 12.5 |
| Chain Pitch | 0.325 |
Features
Professional
Gas
CHANGE THE WAY YOU TRIM TREES
- Attachment mounts directly to a front end loader
- Can be used on tractors, skid steers and backhoes
- Easily attaches to receiver and uses tractor hydraulics
SAFETY FIRST
- No more ladders, standing in buckets or using hand saws
- Limbs fall in front of loader keeping driver out of harms way
- Chainsaw kickback is virtually eliminated
EXTRA LONG REACH
- Saw is 8′ 6″ unattached
- Can reach up to 20′ when attached to front end loader
REVERSIBLE MOTOR
- Helps back saw out in a pinch
SELF OILING SYSTEM
- Keeps bar and chain properly lubricated for better results
REQUIRES HYDRAULIC FLOW RATE OF 7 GPM
- Uses 1-1/2″ NPT fitting to attach to hydraulics
- Handles a max PSI of 3500 (Up to 5,000 with restrictors
Reviews
There are no reviews yet.