Vitus E Sommet Vrs Mountain Bike
VITUS E-SOMMET VRS: NO SHUTTLING REQUIRED
The Vitus E-Sommet VRS eMTB has all the trail-shredding performance of a big-hitting enduro bike, but with a powerful pedal-assist motor that kills climbs and extends access in far-flung terrain.
The E-Sommet VRS is built around the tried-and-true Shimano EP8 motor system with a frame-integrated 630Wh removable battery tucked into the downtube. It’s a torquey and intuitive eMTB platform that, paired with the E-Sommet’s mixed-wheel setup, makes for a snappy ride that keeps you fresh on the climbs so you can absolutely terrorize the descents.
The E-Sommet is a bike that you sit within, not perched on top. It’s a primo platform for just about any gravity-focused ride, but the E-Sommet’s true home turf is in the maw of a janky backcountry descent. Its mixed-wheel setup takes advantage of the enhanced traction and roll-over ability of a 29-inch front wheel while still harnessing the nimble playfulness of a smaller 27.5-inch rear wheel. It stays planted on technical, unpredictable ground and thrives in the chaos of turbulent trails — a magic carpet floating on frenzy.
Shifting is handled by a Shimano SLX 12-speed drivetrain and a burly set of Shimano SLX 4-piston brakes keep gravity in check. Out front is a 170mm RockShox Zeb Select fork and in the rear end is a RockShox Super Deluxe Select R shock with 167mm of travel. It’s an uncompromising e-bike for the days when big downs require big ups.
There are many ways to the top of the mountain, but the E-Sommet just might be the best.
THE E-SOMMET VRS COMPONENT DETAILS
- RockShox Zeb Select fork & Super Deluxe Select R shock
- 250W Shimano STEPS EP8 motor with 630Wh internal battery
- Shimano SLX 12-speed drivetrain
- Shimano SLX 4-piston hydraulic disc brakes
- Nukeproof Horizon V2 tubeless-ready wheelset with tubeless tape applied
- Maxxis Assegai & High Roller II tires
| Material | 6061-T6 aluminum |
|---|---|
| Fork Travel | 170mm |
| Fork Offset | 44mm |
| Rear Travel | 167mm |
| Wheel Size | 29″ Front / 27.5″ Rear |
| Max Tire Size | 27.5″ x 2.5″ |
| Recommended Shock Sag (Measured seated) | 30% (19mm) |
| Shock Size | 205mm x 65mm |
| Shock Hardware (Top) | Trunnion |
| Shock Hardware (Bottom) | 30mm x 8mm |
| Sizing | S, M, L, XL |
| Head Tube | 56-66mm Tapered Semi-Integrated |
| Headset | ZS56/28.6 – ZS66/40 |
| Bearings Required | 4 x 6901-2RS, 8 x 6802V-2RS, 2 x 6902-2RS |
| Seatpost | 31.6mm |
| Seat Clamp | 34.9mm |
| BB | None |
| Rear Hub | 148mm x 12mm |
| Rear Axle | 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch |
| Hanger | SRAM UDH |
| Chain Guide | Shimano EM800 drive unit mount |
| Brake Mount | Post Mount, 180mm |
| Frame Protection | 3D Contoured Rubber Frame Protection for DT/SS/CS and protection film applied to high wear areas |
WHAT’S INCLUDED INSIDE THE BOX:
- The bicycle
- Pedals
- 10-piece multitool that includes:
- 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm Allen keys
- Phillips and flat head screwdrivers
- A T25 Torx
- 15mm pedal wrench
- Bottle of tire sealant
- Reflectors
- Bell
- Spoke protector disc
- User manual
- Any chargers or batteries used on the bike, such as batteries for electronic shifting or e-bike batteries
Reviews
There are no reviews yet.